Many recent Motorola phones show a battery health percentage and charging cycle count right in Settings, and older ones can run a battery test in the Device Help app. Motorola's charging protection comes in two flavours depending on the model. Here is how to check each, and what the results mean.
Method 1: Battery info in Settings
- Open Settings.
- Tap Battery.
- Tap Battery info.
This page shows:
- Battery health: the capacity the battery holds now as a percentage of when it was new. A lower percentage means shorter battery life on a full charge.
- Charging cycle count: how many full cycles the battery has been through.
- Manufacture date and first-use date of the battery.
Motorola's user guides list Battery info on phones such as the motorola signature, moto g max, moto g96 5G and motorola edge 60 fusion, and note the feature is not available in all countries. Some models, such as the razr 2025 and edge+ 2023, do not include it in their guides. If you do not see Battery info, your model or region does not support it; try Method 2.
Method 2: Device Help battery test
- Open the Device Help app (preinstalled on many Motorola phones).
- Tap Learn about my device (on older versions, Device diagnosis).
- Tap Hardware test, then Battery.
The test shows the current power level, Battery condition, battery temperature and charging status. It gives a condition rather than a capacity percentage, so it is best for spotting a clearly failing battery. Device Help is not on every Motorola phone.
What the numbers mean
Most phone makers treat about 80% health as the end of a battery's rated life. Motorola says its newer silicon-carbon batteries average 1,000 to 1,200 cycles before dropping to 80% capacity; EU energy labels list, for example, 1,000 cycles for the Edge 70 and 1,200 for the Edge 70 Pro and Razr 2026 family. If your health is below 80%, or the cycle count is close to that rating and battery life feels short, read when to replace a phone battery. For more on reading cycles, see our cycle count guide.
Turn on charging protection
Motorola uses different names on different models, so check which one your phone has under Settings > Battery.
Battery protection (newer models)
- Open Settings > Battery > Battery protection.
- Turn it on. Charging is limited to 80%.
- Choose a schedule: Smart or Manual.
- Smart schedule: learns your routine and charges from 80 to 100% about an hour before you usually unplug. It needs about five days of consistent charging to learn.
- Manual schedule, Always: always stops at 80%. Unplug and plug back in to charge to 100% once.
- Manual schedule, Specific hours: caps at 80% during a daily window you set, such as overnight.
If the battery has not reached 100% in seven days in a row, Battery protection turns itself off so the battery can charge fully. Motorola recommends charging to 100% at least once a week. Our guide to Android battery calibration explains why an occasional full charge helps the percentage stay accurate.
Overcharge protection (many other models)
Go to Settings > Battery > Overcharge protection and turn it on. If the phone has been plugged in for three days, it limits the charge to 80% and shows an icon in the status bar. To charge to 100%, unplug and plug it back in. This suits phones that live on a charger or a desk dock.
Optimized charging (some models)
Some Motorola phones have Settings > Battery > Optimized charging > Use optimized charging, which limits charging above 80% after the phone has been plugged in for a few days.
What about Motorola dialer codes?
We could not find any Motorola dialer code that is confirmed to show battery health. The Battery info page and Device Help are the supported ways to check.
Tips for a healthy Motorola battery
- Use Battery protection with the Smart schedule if you charge overnight. Read our calm answer on overnight charging.
- Keep the phone cool on TurboPower. See why your phone gets hot while charging and is fast charging bad.
- Partial charges between about 20 and 80% wear the battery least. Read the 20-80 rule.
How bCare helps on Motorola
On models without Battery info, bCare's battery health score measures the real capacity in mAh during normal 20 to 80% charges, compares it with the design capacity and shows charge cycles, using the count Android reports where available and estimating otherwise. On models with Battery info, it adds a 14-day trend and shows which habits, such as heat or long hours at 100%, are costing you capacity. A battery full alarm rings at any level you choose if you prefer unplugging to a hard limit, and the overheat alert warns you when the battery runs hot.